Error description: Installed Consult-III Plus V75 software on win7, got error ” CONSULT-III plus software is not supported by this computer. Check the computer and install CONSULT-III plus software on a suitable computer. Touch ‘OK * to finish the installation.” I also installed on Win 10 Pro, Win 7 Enterprise, Win Xp Sp2 etc, I got the same error message.

Engineer replied:

You have to put the following file into the software before installing consult-iii plus v75

https://mega.nz/#!RVxWkSDb!XbsvWRI90YScFLdq3AZUGJHDhu5Iq_rvpJ9VE-rHfFM

Simple steps:

1.Open “tempNissan” -> “C3P_V75.15.00”

2.Copy “Setup.inx” on the desktop, paste it into “C3P_V75.15.00” to replace the original one.

What Nissan Consult 3 Plus?

Nissan Consult 3 is a diagnostic software special for Nissan,support all the models of the Nissan and Infiniti from 1996 up till now, with all Consult II & III functions.It can support all Nissan car,Infiniti carand Nissan GTR.

Nissan Consult 3 Plus Functions List:

Supports ECM reprogramming on most 1999 model year and later and some TCM and ABS/VDC reprogramming.

Supports blank ECM and TCM programming.

Supports ECM reprogramming on most 1999 model year and later and some TCM and ABS/VDC reprogramming.

Supports blank ECM and TCM programming. September 2013 Nissan and Infiniti began the phase-in of “blank” service part ECMs and TCMs. Depending on the model and model year, replacement modules come WITHOUT software. When the replacement module is installed in an applicable vehicle for any reason, it will need to be programmed.

Optional Security Card-Type A Kit must be approved security professional to purchase

Nissan Consult 3 Plus Specifics:

PC Based: PC Require

Model Year Coverage: The Consult-III Plus is required for all 2013 and newer Nissan and Infiniti vehicles. In addition, the Consult-III Plus is required for all: 2011 and newer Nissan LEAF, Quest, and Murano CrossCabriolet vehicles; 2012 and newer Nissan GT-R and NV vehicles; and 2012 and newer Infiniti M and M Hybrid vehicles. The Consult-III Plus software is continuously being updated to accommodate new vehicles as well as older model years dating back as far as 1996.

PC Recommended: Nissan Specific, Panasonic Toughbook

Software License:https://www.nissan-techinfo.com/

Nissan Consult 3 Plus Support Car Models:

Diagnostics:for all Nissan,Infiniti,GTR
Immo and Smart key:for all Nissan,Infiniti,GTR
Nissan GTR: for Nissan GTR Diagbostics and Immobi
Electromobiles car:for Nissan Electromobiles car Diagbostics and Immo

Nissan and Infiniti from 1996 up till now
Note:Consult III Plus – 1996MY up

Nissan Consult 3 Plus Support Languages:

English, Portuguese (Newly Add), French, German, Spanish, Italian, Japanese, Russian, Finnish, Greek, Chinese(Simplified), Chinese(Traditional)

Nissan Consult 3 Plus Installation OS Requirement:

Operating System Environment

*   Windows: Windows® 2000, Windows XP, Windows Vista, Windows 7, 8 or 8.1
*   Mac: Macintosh 8.x, 9.x, OS X
*   Disk Storage: 10 MB available hard-drive space
*   Display Resolution: 800 x 600 pixels (1024 x 768 recommended)

Nissan Consult 3 Plus Installation Guide:

The installation methods of different Consult 3 may be similar,if there here is no version that you have or you have higher version,please try to install it referring to these method by yourself.

How to Install Nissan Consult 3 III Plus Diagnostic Software

Nissan Consult 3 Plus Free Download:

Nissan consult 3+ plus V83.11.00:

https://mega.nz/#!D9ZRnaSL!Y6rksoTqF1rbpx2-tIvliYFN5RcQSb6s-WwKqBGByZI

Nissan Consult 3+ Plus V81.11.00

https://mega.nz/#!ukhgRSYJ!DXM22QAbQDo-b4Di9e6tyxy2SE4fKVogLmKCv6QzZUA

Nissan consult3 plus V75.20 free download:

https://mega.nz/#!WYYmiQ6J!QDCblZBomUBfEkTUEHd9ZCHWzV0cUKM-_3fT0nW7scg

Nissan Consult 3 Plus V72.13 free download

https://mega.nz/#!EVBC1I6a!mwvSkwf4SKqBN0oYDAhpvWJNFPHdWSKHKGaKgXknkSw

Nissan Consult 3 Plus V71.11.00 & 71.20.00 from 05.2017

https://yadi.sk/d/GsZoo_VD3KxqER